HEATED MOTORCYCLE GLOVES 12V GERBING G-12
LAST PIECES WITH 20% DISCOUNT!
Supplied with junior controller and battery connection cable.
The G12 motorcycle gloves are elegant and have a perfect fit
They are very comfortable and have a good freedom of movement thanks to the very soft and supple leather.
Direct connected to your motorcycle battery or optionally be worn with a separate battery.
Continuous heat while riding :
-
Direct connection to the vehicle battery using the battery cable CXPP.
-
With the included Junior controller JC-12V you can control the heat in 4 levels.
Within a few seconds you will feel the warmth of the electrically heated gloves.
Glove features :
-
The heated gloves are made of supple, soft full aniline leather.
-
Stainless steel, sustainable heating Microwire® , not noticeable in the glove.
-
Heating over the entire length of the fingers and the upper side hands.
-
High level of comfort thanks to vibration reducing properties.
-
Hipora® Lining , breathable and protection against water and wind.
-
Thinsulate® Insulation for extra warmth and comfort.
-
Soft tricot fleece lining.
-
Adjustable wrist strap with Velcro closure.
Specifications :
-
Microwire®technology , very good and uniform heat conduction.
-
12 Volt power source (motorcycle, scooter, quad, car, plane).
-
Power consumption : 27 Watts / 2.2 Amp
-
Surface T ° : 5°C at -2°C to 2°C
-
Available Sizes : XXS - XXXL
-
12Volt heated gloves Gerbing are designed to produce sufficient heat at temperatures of -20°C and with a speed of 120 Km / h.
-
As the outside temperature rises ,12V gloves will be warmer.
-
From +5°C , you can risk red spots or blisters caused by too hot gloves.
-
Check your skin regularly and do not let the temperature rise to high.
-
Use your temperature controller in time !
OPTIONAL : for use without connecting to the vehicle
-
With a separate, rechargeable 12V battery in connection with your gloves through a long Y-cable CXY.
-
Batteries : you can choose the B12V-5200 KIT or powerful B12V-8000 KIT (KIT = battery + remote + charger).
Note : the junior controller can not be used in conjunction with a separate, rechargeable 12V battery.
Battery capacity / heat duration in connection with gloves |
B12V - 5200 |
B12V - 8000 |
Level 3 : +- 2.5 hours |
Level 3 : +- 5 hours |
Level 2 : +- 4 hours |
Level 2 : +- 8 hours |
Level 1 : +- 7 hours |
Level 1 : +- 14 hours |
The duration of the rechargeable battery may vary depending on the outside.
Capacity decreases as it gets colder.
Below 0 ° C the battery will have a capacity of about 80%
Maintenance batteries : READ MORE
Warranty Gerbing : READ MORE